Aoyin 5454 marine aluminum plate is aluminum-magnesium alloy and boat building aluminum plates,has little higher strength than 5052 marine grade aluminum plate, and has better corrosion resistance and weldability, especially excellent elevated temperatures adaptability. Aoyin Aluminum manufactures this boat-building aluminum with very stable quality..

6082 aluminum sheets belong to 6 series (Al-Mg-Si) aluminum alloy that can be heat treated. 6082 aluminum sheets have medium strength, excellent weldability and corrosion resistance. They are mainly used in transportation and structural engineering industries, such as bridges, cranes, roof frames, transport planes, transport ships, etc. In recent years, with the rapid development of ship building .

3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability, and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for an aluminum with good weldability. H14 designates the temper, .

5083 marine grade aluminum plate sheet in good corrosion resistance, the corrosion rate in seawater is very slow, the uniform corrosion rate is generally 0.025-0.05mm/ years, can resist the corrosion of seawater and marine atmosphere on the ship, reduce oil and maintenance cost, long service life. 5083 marine grade aluminum plate sheet with high strength and low fracture toughness, it is suitab.

aluminum alloy Thick plate China supplier factory price.

Aluminum sheet 1000 series :1050/1060/1070/1080/1085/1100/1200 Temper:O, H14, H16, H24, H22, H26 Excellent elongation and tensile strength can satisfy general industry demands. The thickness of 1000 series aluminum sheet varies from 0.02mm to 4.5mm, and the max width is 1,7000mm..

3003 h18 aluminum coil belongs to rolled-up aluminum sheet, which just performs work hardening after casting and rolling. Without annealing, the high hardness is obtained. Under the another temper H24, 3003 aluminum coil is incompletely annealed, and the tensile strength is 50MPa higher than that in annealed condition. Therefore, 3003 h18 aluminium coil is the perfect material for the honeycomb co.

Forged aluminum products are used in a wide range of industries, including the aircraft, aerospace, automotive, architectural, appliance, military and defense, marine, petrochemical, and process equipment industries. .

application： Construction; Car; Aerospace; Ship; Armarium; Industrial equipment; Architecture and etc..

1050 h24 aluminium refers to h24 tempered 1050 aluminium alloy, that is the 1050 aluminum after work hardening is incompletely annealed to get 1/2 hard. Meanwhile, obtaining the strength of aluminium 1050 h24 is roughly halfway between annealed (O) and full-hard (H28). In essence, 1050 aluminum alloy is typical 1 series pure aluminum with 99.5% Al. So, 1050 h24 aluminium alloy retains silvery whit.